G550 Steel Roof Fastening Pattern Tables

Wind Speed as per NZS 3604:2011 Timber Framed Buildings

Windspeeds below are the maximum ultimate limit state wind speed for each wind zone.
L	=	Low wind speed of 32 m/s	M	=	Medium wind speed of 37 m/s
H	=	High wind speed of 44 m/s	VH	=	Very high wind speed of 50 m/s
EH	=	Extra high wind speed of 55 m/s
SED	=	Specifc Engineering Design (not covered by NZS 3604)

(optional caption)

0.40 mm Corrugate G550 Steel (Min Depth 16.5 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Restricted	0.6	C2	C2	C2	C2	C4
Restricted	0.9	C2	C2	C3	C4	C4
Non-Trafficcable	1.2	C3	C3	C4	C5	N/A

(optional caption)

Corrugated Fastener Patterns

(optional caption)

0.55 mm Corrugated G550 Steel (Min Depth 16.5 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Unrestricted	0.6	C2	C2	C2	C2	C2
Unrestricted	0.9	C2	C2	C2	C2	C3
Unrestricted	1.2	C2	C2	C3	C3	C4
Restricted	1.5	C2	C2	C3	C4	C4

(optional caption)

Corrugated Fastener Patterns

(optional caption)

0.40 5 Rib Trapezoidal G550 Steel (Min Depth 27 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Restricted	0.6	5T2	5T2	5T2	5T2	5T2
Restricted	0.9	5T2	5T2	5T2	5T3	5T3
Restricted	1.2	5T2	5T2	5T3	5T4	5T4

(optional caption)

5 Rib Trapezoidal Fastener Patterns

(optional caption)

0.55 5 Rib Trapezoidal G550 Steel (Min Depth 27 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Unrestricted	0.6	5T2	5T2	5T2	5T2	5T2
Unrestricted	0.9	5T2	5T2	5T2	5T2	5T3
Unrestricted	1.2	5T2	5T2	5T2	5T3	5T3
Unrestricted	1.5	5T2	5T2	5T3	5T3	5T4

(optional caption)

5 Rib Trapezoidal Fastener Patterns

(optional caption)

0.40 mm 6 Rib Trapezoidal G550 Steel (Min Depth 27 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Unrestricted	0.6	6T3	6T3	6T3	6T3	6T3
Unrestricted	0.9	6T3	6T3	6T3	6T5	6T5
Unrestricted	1.2	6T3	6T3	6T5	6T5	6T5

(optional caption)

6 Rib Trapezoidal Fastener Patterns

(optional caption)

0.55 mm 6 Rib Trapezoidal G550 Steel (Min Depth 27 mm)

		Wind zone as per NZS 3604
Access	Span (m)	L	M	H	VH	EH
Unrestricted	0.6	6T3	6T3	6T3	6T3	6T3
Unrestricted	0.9	6T3	6T3	6T3	6T3	6T3
Unrestricted	1.2	6T3	6T3	6T3	6T3	6T3
Unrestricted	1.5	6T3	6T3	6T3	6T5	6T5

(optional caption)

6 Rib Trapezoidal Fastener Patterns

(optional caption)

Clause:

003_010_001_000_000_000_000_000_000

Clause Number:

3.10.1

/cop/structure/fastening-pattern-tables-designs-nzs-3604#g550-steel-roof-fastening-pattern-tables

Revision Category:

1 - Minor Errata

Revision Detail:

Clause has been renamed to clearly differentiate between roof and wall cladding fastening patterns.

Log in to post comments