Menu

Boot Flashings to an Over Flashing

Boot flashings fitted to an over flashing are acceptable at pitches down to the minimum of that allowed for the profile. Typically, this is 8° for standard corrugated, and 3° for trapezoidal and trough sections. These boot flashings must be fixed diagonally to the fall of the roof at pitches below 10°.

Over flashings can be continuous to the apex, or terminate with a soaker at the upper edge.

Over-Flashed Boot Flashing on Corrugated Profile

(optional caption)

Over-flashed Boot with Soaker Level Curb on Trapezoidal Profile

(optional caption)

Over-flashed Boot with Arrowhead Soaker on Trapezoidal Profile

(optional caption)
Clause: 
009_005_001_000_000_000_000_000_000
Clause Number: 
9.5.1
/cop/penetrations/boot-flashings#boot-flashings-over-flashing
Revision Category: 
4 - Clause Inserted
Revision Detail: 

New Clause